Home » Products » Soft Ice Cream Machine » Single Flavor Soft Ice Cream Machine » TT-2 Twin Twist Soft Ice Cream Machine

TT-2 Twin Twist Soft Ice Cream Machine

Features
1.This twin twist soft ice cream machine is made up of a counter top, a pump feed, a touch button control panel, several stainless steel panels, two 1.7 liters (1.8 quarts) freezing cylinders, and two 15 liters (15.9 quarts) mix hoppers.
2. Its output is 25 L/H and 190 Cones/Hour (100g/cone).
3. This twin twist soft ice cream machine offers all popular soft serve variations from low or non-fat ice cream to custards, yogurt and sorbet.
4. Separate hopper refrigeration (S.H.R.) maintains mix temperature below 5ºC (41ºF) under Mix Refrigeration mode.
5. When mix level is low, the Mix Low light on this twin twist soft ice cream machine turns "ON" to alert operator to add mix.
6. This twin twist soft ice cream machine displays hardness status of the refrigerated product to ensure product quality.
7. During long no-use periods, the standby feature maintains safe product temperature in the mix hoppers and freezing cylinders.
8. The microprocessor controls automatically regulate refrigeration by monitoring product temperature and viscosity to maintain consistent quality.
9. One dedicated electrical connection is required. Unit shall be cord connected for single phase units and permanent connected for 3 phase units.
10. This twin twist soft ice cream machine has a 2 HP beater motor.
11. The main refrigeration system has one compressor of 3650 BTU/hr. The separate hopper refrigeration (S.H.R.) employs one compressor of 420 BTU/hr. (BTU may vary depending on compressor used.)
12. The minimum required air cooled clearance is 152mm (6") on both sides. Unit rear must be placed against a wall to prevent recirculation of hot air. Minimum air clearances must be met to assure adequate air flow for optimum performance of this twin twist soft ice cream machine.

Specifications

Weight Kg/lb
Net 160 / 353
Shipping 180 / 400
Packaging Volume 0.59 CBM / 20.84CBF
Dimensions Net (mm/in) Shipping (mm/in)
Width 550 / 21.7 650 / 25.6
Depth 650 / 25.6 780 / 30.7
Height 960 / 37.8 1160 / 45.7
Electrical Maximum Fuse Size Minimum Circuit Ampacity Poles (P) Wires (W)
220-240/50/1~ 20 14 3P 3W
208-230/60/1~ 25 16 3P 3W
208-230/60/3~ 25 16 / 4W

Note
Continuing research results in steady improvements; hence specifications listed here are subject to change without notice.

Founded in 1995, we have over 10 years of experience in the manufacture and supply of twin twist soft ice cream machines for our global clients. This sufficient experience enables us to manufacture high quality frozen slush machines, juice dispensers, cooler refrigerators, ice cream powders and glass washers. Please contact us for more details.

Other Products
  • TT-8 Twin Twist Soft Ice Cream MachineThe minimum required clearance of this single flavor soft ice cream machine is 152mm (6") on both sides. Unit rear must be placed against a wall to prevent recirculation of hot.
  • TT-9 Twin Twist Soft Ice Cream MachineThis twin twist soft ice cream machine is made up of a counter top, a pump feed, dual beater motors, a touch button control panel, stainless steel panels, two 1.7 liters (1.8 quarts).
  • TT-10 Twin Twist Soft Ice Cream MachineThis floor model twin twist soft ice cream machine is made up of a pump feed, independent refrigeration systems, a touch button control panel, stainless steel.
  • TT-11 Twin Twist Soft Ice Cream MachineThis floor model twin twist soft ice cream machine is made up of a gravity feed, independent refrigeration systems, touch button control panels, stainless.
Contact Us